‚ NOTE: Some Nikon DTM-310 Models have had software upgrades in the instrument. ‚ ‚ ‚ ‚ ‚ ‚ On screen you should see your point, code, and elevation. You are allowed choices of the 300 or 400 model. ‚ ‚ ‚ ‚ ‚ ‚ MapScenes will then ask you to select the Model. ‚ ‚ ‚ ‚ ‚ ‚ MapScenes will now ask if you want to Process Data. ‚ ‚ ‚ ‚ ‚ ‚ All the data is now transferred from the Instrument into MapScenes or MapScenes Pro Software.Ĥ. Once MapScenes tells you to send data, Press the Enter key on the Instrument.ģ. ‚ ‚ ‚ ‚ ‚ ‚ Follow the prompts on the screen. ‚ ‚ ‚ ‚ ‚ ‚ In your Mapscenes or MapScenes Pro Software, Chose the Nikon Instrument from the Download MenuĢ. This Screen is marked Comm for Communications.Ĥ. ‚ ‚ ‚ ‚ ‚ ‚ Press the 7 Key from the Menu. With the Nikon Instrument 4800 is recommended.ģ. ‚ ‚ ‚ ‚ ‚ ‚ Ensure your download speed on the instrument and the download speed in your software are the same. ‚ ‚ ‚ ‚ ‚ ‚ Connect your serial transfer cable to the total station and the computer which has your MapScenes Software loaded.Ģ. Recording Similar points such as one side of the road (EP) will save the operator time by not having to change the code values.ĭownloading from the Instrument to MapScenes Softwareġ. It will automatically default to your next point number and will retain the previous height of target and code in memory. Your data collector will then move on to the next point to be recorded. This prompts you to enter the target height and code. Sight the prism aligning the cross hairs. This is done by pressing the number 5 key on the Keyboard.

‚ In order for the data collected to be compatible with MapScenes Software, this measurement and all points following must be recorded as coordinate points. Place a PK nail at the end of your measurement. This ensures that any previous jobs recorded by the total station are cleared from memory.Ĭomplete your Station Set Up, Backsight and record your occupied point according to your course of instructionĬreate your known measurement using a tape measure. ‚ ‚ ‚ ‚ ‚ ‚ Select the number 3 key for the Clear function. When you press this key, your screen will read:Ĥ. This is accomplished by pressing the #6 Key labeled Data.

‚ ‚ ‚ ‚ ‚ ‚ Ensure that the on-board data collector is clear of all data. Prism 3: Ht 4: Cogo: 5: Set: 6: Data 7: Commģ. The display will show the following selections: ‚ ‚ ‚ ‚ ‚ ‚ Hit the Function Key on the instrument until you see the seven menus displayed. ‚ ‚ ‚ ‚ ‚ ‚ Set-up and Level your instrument according to your training standards.Ģ. Posted by Jason Poitras on 07 December 2006 11:22 AMġ.

Driver usb nikon dtm 322 total station